PWM 920 [SI DV DD] - Performance
View product
Short programme cycles
Quick and efficient
Are short programme cycles the most important factor for you? If so, then Miele Professional laundry machines are your first choice: Thanks to top quality commercial technology your laundry is available again for use after a very short time.
3-dimensional imbalance monitoring
Spinning at a professional standard
The 3D imbalance monitoring guarantees consistent residual moisture values. As well as this, it reduces the strain exerted on the suspension system and drum bearings – a significant factor in the washing machines achieving long service lives.
EcoSpeed – patented wash rhythm*European patent: EP 1354997 B1
A new balance of mechanical action and water usage
The EcoSpeed wash process features an optimised drum rhythm. Working at a low speed, the scoop ribs take in a large amount of water, which wets the laundry intensively from above. The speed is then increased gradually and the laundry is pressed against the drum wall. The reinforced mechanical action enables intensive cleaning performance with less water.
Preparation of cleaning cloths
Ready for immediate use
Cleaning cloths can be used again immediately by being treated with cleaning or surface disinfection agents while still in the machine. This process saves an enormous amount of time and increases cleaning performance as well as efficiency - especially compared to manual preparation.
Exclusive to Miele
Patented pre-spin*Patent: EP 2 003 236 B1
Clean from the start
Wet and heavily soiled cleaning cloths present a real challenge for the washing process. The patented pre-spin removes excess water from cleaning cloths as soon as the programme starts. This reduces the amount of soiling and tensides getting into the next stage of the wash process. The result is outstanding cleanliness with the greatest possible material protection.
Excellent spin performance
Intensive dewatering for high energy efficiency
The exceptional product quality of Miele washing machines enables spinning with a very high g-factor. This reduces the residual moisture of the laundry to a minimum, thereby saving valuable energy in the subsequent drying process.