Compare
PDR 511 SL COP HP [EL IGS]
Heat-pump dryers in SlimLine design, with time control, for connection to payment systems, 230 V.
- Drum volume 200 l, load size8 kg–11 kgNote
Based on a load ratio of 1:25–1:18 - 60 % less energy consumption than vented dryers*Heat pump dryers consume up to 60 % less energy than an electrically heated vented dryer.
- Very easy installation - only 711 mm wideSlimLine design
The slim design, just 711 mm wide, fits in the smallest space. - Easy to move - direct access underneathUnderride option
Simplified transport thanks to direct access underneath the plinth. - Shortest cycles thanks to diagonal air flowDiagonal air flow
The diagonal air flow ensures the optimum use of energy, short cycle times & perfect drying results.
Front wall texture
Product benefits
Energy-saving heat-pump system*The heat pump contains fluorinated greenhouse gases in a hermetically sealed system.
Minimal energy consumption
Up to 60% reduction in energy consumption thanks to pioneering heat-pump technology.
Excellent ergonomics
Ergonomic loading and unloading
Convenient loading and unloading of laundry thanks to the elevated design of the dryer and the high door position.
Easy to understand symbols
Language-neutral operation
The control panel is characterised by logically arranged and easy to understand symbols.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Energy-saving heat-pump system*The heat pump contains fluorinated greenhouse gases in a hermetically sealed system.
Minimal energy consumption
Up to 60% reduction in energy consumption thanks to pioneering heat-pump technology.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
SoftLift drum ribs ensure gentle fabric care
Take it with you
The SoftLift drum ribs allow laundry to be dried gently and evenly.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Excellent durability
Ultimate quality
Professional technology ensures excellent reliability and durability for daily work routine.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Excellent ergonomics
Ergonomic loading and unloading
Convenient loading and unloading of laundry thanks to the elevated design of the dryer and the high door position.
Easy to understand symbols
Language-neutral operation
The control panel is characterised by logically arranged and easy to understand symbols.
Large fluff filter
Simple to clean
The very large filter surface is particularly easy to clean.
Countdown indicator
An eye on the time
After the programme has started, the display shows the cycle time remaining.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Product details
PDR 511 SL COP HP [EL IGS]
EAN 4002516681274 / Article number 52511012GB / Material number 12295730
EAN 4002516681274 / Article number 52511012GB / Material number 12295730
| Construction type | SlimLine |
|---|---|
| Range | Performance |
| Front | Iron grey |
| Fascia color | Stainless steel |
| Load size with a load ratio of 1:25 | 8 |
| Load size with a load ratio of 1:18 | 11 |
| Drum volume in l | 200 |
| Drying system | Heat pump |
| Door opening [Ø] in mm Large drum opening Large drum opening for fast, ergonomic loading and unloading ensures smooth operation. | 520 |
| Door opening angle in degrees | 180 |
| Door hinge | left |
| Stainless steel drum |
| Maximum evaporation capacity in l/hour Note In the Cottons/Normal drying programme or with residual moisture reduced from 50 % or 48 % (depending on model) to 0 % (with the lowest recommended load ratio). | 4.5 |
|---|---|
| Specific energy consumption in kWh/kg Note In the Cottons/Normal drying programme or with residual moisture reduced from 50 % or 48 % (depending on model) to 0 % (with the lowest recommended load ratio). | 0.22 |
| Programme duration in min. Note In the Cottons/Normal drying programme or with residual moisture reduced from 50 % or 48 % (depending on model) to 0 % (with the lowest recommended load ratio). | 59 |
| Control system | M Select Benchmark |
|---|---|
| Programmability | Setting of defined parameters |
| User interface | time-controlled |
| Time left display | |
| Programme sequence indicator | |
| Control panel with easy-to-understand symbols |
| Heating type | Heat pump with CleanStream Energy-saving heat-pump system* Up to 60% reduction in energy consumption thanks to pioneering heat-pump technology.The heat pump contains fluorinated greenhouse gases in a hermetically sealed system. |
|---|---|
| Electrical connection | 1N AC 230V 50HZ |
| Heater rating, heat pump in kW | 6.4 |
| Total connected load in kW | 3 |
| Fuse rating in A | 16 |
| External dimensions, height in mm | 1800 |
|---|---|
| External dimensions, width in mm | 711 |
| External dimensions, depth in mm | 1075 |
| External dimensions, gross height in mm Note Including packaging | 1810 |
| External dimensions, gross width in mm Note Including packaging | 800 |
| External dimensions, gross depth in mm Note Including packaging | 1180 |
| Net weight in kg | 192.7 |
| Gross weight in kg Note Including packaging | 206 |
| Maximum floor load in N Maximum floor bearing capacity Maximum floor bearing capacity states the maximum force (N) that the surface on which the machine is installed can tolerate. This maximum load bearing capacity is the result of adding up the weight of the machine, the load and the water in it, as well as the dynamic forces that occur during operation. | 2052 |
| Emission sound pressure level in the workplace Emission sound pressure level in the workplace The emission sound pressure level is a value given to the noise created by the machine. Miele Professional commercial laundry machines have very low noise levels. | 55 dB(A) re 20 µPa |
|---|---|
| Heat dissipation into the room in MJ/h Heat output into the room During operation, laundry machines release heat into the surrounding area. The released amount of heat/time depends on the set temperatures and the intensity of use. The stated maximum value can be used to control the temperature of the area or to calculate an increase in room temperature. | 2.3 |
| Intelligent drum reversal | |
|---|---|
| Large-surface fluff filter | |
| SoftLift drum ribs | |
| Retractable plinth | |
| Communication slot | |
| Machine-independent accessories |
| Recycling rate in % | 91 |
|---|---|
| Contains fluorinated greenhouse gases | |
| Hermetically sealed system | |
| Coolant | R450a Note Refrigerant R450a features a low global warming potential (GWP) and is therefore more environmentally friendly than conventional refrigerants. |
| Refrigerant quantity in kg | 1.35 |
| Refrigerant global warming potential in kg CO2e | 605 |
| Appliance global warming potential in kg CO2e | 877 |
| Payment system (optional) | |
|---|---|
| Optical interface for service access | |
| Peak-load negotiation / energy management (optional) | |
| WiFi tumble dryer | |
| Connector Box | |
| LAN module (optional) |
| CE | |
|---|---|
| VDE | |
| VDE-EMC | |
| Splash-proof safety rating IPX4 | |
| WEEE | |
| UKCA | |
| Complies with Machinery Directive 2006/42/EC |
Additional accessories and consumables
Find additional accessories and consumables to go with this product
Additional accessories for laundry technology
Find here the accessories that can be bought additionally for this product.
Downloads
You can download these CAD data for free. You will receive a download link via e-mail.
3D data RVT
3D data DWG
3D data RFA
3D data IFC
3D data FBX