PG 8591 [WW AD]

Thermal disinfector with hot and AD water connection, liquid dispensing & DryPlus hot air drying.

Performance/cycle, e.g. 44 transmission instruments or 44 suction devices
Further stacking options
Further instruments can be also be reprocessed in the upper or lower basket in each cycle.
Safety through monitoring - wash pressure and spray arm monitoring
For a reliable result
Outstanding preparation results are achieved because the jet pressure and spray arms are monitored continuously and a decline in jet pressure or load blockage is detected immediately
Efficient hot air drying - DryPlus
Efficient drying
The hot air drying feature DryPlus is the perfect solution for hollow body instruments. The upstream H13 HEPA filter ensures optimum particle separation from the drying air. The filter can be easily accessed via a cover in the front of the plinth area.
Total security - link to process documentation possible
End-to-end documentation
The optional addition of a module for process documentation is provided via a communication slot. The Ethernet module is used for documentation via software. The RS 232 module must be used for documentation within a USB solution or via a printer.

String El. connection Standard

Get a quote

Product benefits

Variable speed heater pump

The heart of perfect results

Only with Miele Professional: The wash pressure is perfectly tailored to the changing requirements.

Integrated water softener

Clean results

The integrated water softener ensures optimum cleaning effectiveness.

DryPlus

For perfect drying results

Efficient hot air drying: Ideal for drying hollow body instruments or narrow-lumened laboratory glassware.

Crevice-free wash cabinet

Seamlessly welded

Perfect hygiene through optimised geometry and laser welding.

Spray arm monitoring

Safety through controls

Reliable cleaning performance thanks to the monitoring of the rotation speed of the spray arm.

Spray arm pressure monitoring

Safety through controls

The wash pressure is monitored for perfect cleaning results.

Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.

Variable speed heater pump

The heart of perfect results

Only with Miele Professional: The wash pressure is perfectly tailored to the changing requirements.

Integrated water softener

Clean results

The integrated water softener ensures optimum cleaning effectiveness.

DryPlus

For perfect drying results

Efficient hot air drying: Ideal for drying hollow body instruments or narrow-lumened laboratory glassware.

Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.

Ethernet interface

Cable-supported communication

The Ethernet interface enables cable-supported communication in the local network.

RS 232 serial interface

Simple data exchange

The serial interface facilitates the exchange of data with other appliances, e.g. for process documentation.

Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.

Crevice-free wash cabinet

Seamlessly welded

Perfect hygiene through optimised geometry and laser welding.

Heater elements outside the wash cabinet

Hygienic and practical

A plus for hygiene: The heating elements are installed outside the wash cabinet.

Easy-to-service construction

Simple access to the machine

Short service times thanks to maintenance-optimised appliance design.

Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.

Spray arm monitoring

Safety through controls

Reliable cleaning performance thanks to the monitoring of the rotation speed of the spray arm.

Spray arm pressure monitoring

Safety through controls

The wash pressure is monitored for perfect cleaning results.

HEPA filters

Pure air

Protection against contamination thanks to particle-free drying air.

Process documentation

End-to-end documentation

Safety through the clear documentation of all the reprocessing steps.

Waterproof System (WPS)

Protection against flooding

Protection against flooding: In the event of problems, the system stops water intake automatically.

Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.

Clear text display

Text display

Everything at a glance: The display shows everything as clear text in the country-specific language.

AutoClose^*Patent: EP 1 733 675 B1

Automatically closing door

A light touch is all it takes: With AutoClose, the door closes by itself.

Short cut buttons

Select favourite programmes quickly

Quick and convenient access to frequently used programmes.

Large selection of components

Reprocess flexibly

Flexible and comprehensive components for optimum cleaning performance and a variety of reprocessing options.

Patented in-door salt container

Replenish salt conveniently

Ergonomic convenience: The in-door salt container is particularly easy to fill.

Can be built under a worktop

For a consistent look

The machine can be easily integrated under a worktop.

Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.

Show all benefits

Product details

PG 8591 [WW AD]
EAN 4002515558393 / Article number 63859121GB / Material number 10087460

Construction type and version

Construction type	Freestanding, can be built-under, slimline
Casing	White
Can be built-under	Can be built under a worktop The machine can be easily integrated under a worktop.
AutoClose – automatic door lock	AutoClose^* A light touch is all it takes: With AutoClose, the door closes by itself.Patent: EP 1 733 675 B1
Buzzer, acoustic signal at end of programme
Service-friendly design	Easy-to-service construction Short service times thanks to maintenance-optimised appliance design.

Application

Suitable for dental surgeries	Perfect for dental practices Miele thermal disinfectors meet the requirements of dental practices particularly well. These compact machines offer outstanding reprocessing results for all instruments thanks to their powerful wash systems. Even challenging transmission instruments are reprocessed thoroughly and gently.

Capacity

Suction devices per cycle [number]	44
Transmission instruments per cycle [number]	44

Performance data

Circulation pump, Qmax in l/min	500
Maximum final rinse temperature in °C	93
Wash cabinet usable capacity in l	145
Tested operating hours Note Our machines undergo intensive testing under laboratory conditions. The actual operating hours may vary depending on actual usage behaviour, maintenance and care of the machine.	15000

Control system

Control type	TouchControl
Programme selection	Touch on Metal Touch on Metal Greater user convenience and easy surface cleaning.
Direct-access pushbuttons	Short cut buttons Quick and convenient access to frequently used programmes.
Max. delay start in h	24
Programmability	programmable
Programmes [number]	7
Free programme positions [number]	2
A0 value controls	Intelligent A0-value controls As soon as the prescribed A0 value is reached, the disinfection phase comes to an end and the programme continues in the next phase. Due to this system the cycle time is reduced, in comparison to a time-controlled programme.
Automatic programme restart	Programme failure protection Time-saving and safe: The programme failure protection facilitates the continuation of the cleaning and disinfection process after a short interruption, such as a power cut. If the success of the reprocessing process should be at risk, the appliance issues a corresponding warning message.
Time left display
Programme sequence display
Selectable display languages	Adjustable display language No misunderstandings: The user can select his/her language of choice from a number of different options. All display notifications appear in this language, so that the highest level of operating safety is ensured.

Standard electrical connection

Electrical connection	AC 230V 50HZ
Electric heater rating in kW	5.5
Total rated load in kW	6.3
Fuse rating in A	30-32
Length of mains connection cable in m Note The length refers to the supply lead on the outside of the appliance.	1.9

Possible voltage variant 1

Electrical connection	3N AC 400V 50HZ
Electric heater rating in kW	8.5
Total rated load in kW	9.3
Fuse rating in A	15-16

Possible voltage variant 2

Water connection/drainage

Cold water [number]	1
Cold water for steam condenser [number]	1
Hot water [number] Efficient hot water connection Connection to the warm water supply saves a lot of time and energy.	1
DI water [number] DI water connection Thanks to the connection for fully demineralised water (DI water), these washer-disinfectors and thermal disinfectors facilitate optimum reprocessing results. Carrying out the final rinse with DI water also protects valuable wash items from deposits and corrosion.	1
Required flow pressure in kPa Note on ADP variants This value applies to cold, hot and DI water; however, it does not apply to DI water intake on ADP variants because these use a feed pump.	200-1000
Maximum delivery head for drain pump in cm	100
Integrated water softener	Integrated water softener The integrated water softener ensures optimum cleaning effectiveness.
Maximum water hardness (cold water/hot water) in mmol/l	10.7
Drain pump [DN]	22
Water protection system Waterproof System (WPS) Protection against flooding: In the event of problems, the system stops water intake automatically.	Waterproof system

Drying unit

Integrated drying unit	Drying unit Reliable reprocessing results achieved more quickly with hot air drying.
Fan in kW	0.3
Heater element in kW	2.2
Total rated load in kW	2.5
Air throughput in m³/h	60
Temperature setting in 1 °C increments	50-115
Time setting in 1-minute increments	0-120
HEPA filter class	H13 HEPA filters Protection against contamination thanks to particle-free drying air.
HEPA filter filtration efficiency (in accordance with DIN EN 1822) in %	99.95
HEPA filter service life in h	200

Dimensions and weight

External dimensions, net height in mm	835
External dimensions, net width in mm	600
External dimensions, net depth in mm	600
External dimensions, gross height in mm Note Including packaging	940
External dimensions, gross width in mm Note Including packaging	675
External dimensions, gross depth in mm Note Including packaging	745
Wash cabinet, usable height in mm	520
Wash cabinet, usable width in mm	530
Wash cabinet, depth of upper basket in mm	474
Wash cabinet, depth of lower basket in mm	520
Net weight in kg	78
Gross weight in kg Note Including packaging	85

Emissions data

Emission sound pressure level in the workplace Emissions - sound pressure at workplace The emission sound pressure level depends on the programme and is a value given to the noise created by the machine. Miele Professional appliances have very low noise levels.	<lt/>70 dB(A) re 20 µPa
Heat dissipation into the room in MJ/h Heat output into the room During operation warm air is vented into the surrounding room. The released amount of heat/time depends on the set temperatures and the intensity of use. The stated maximum value can be used to control the temperature of the area or to calculate an increase in room temperature.	1.65

Programmes

Vario TD Intensive	Vario TD The tried-and-tested cleaning and disinfection programme for perfect results whilst protecting materials.
Vario TD Dental	Vario TD The tried-and-tested cleaning and disinfection programme for perfect results whilst protecting materials.
Vario TD Dental +	Vario TD The tried-and-tested cleaning and disinfection programme for perfect results whilst protecting materials.
Special 93 °C–10'

Features

1 door dispenser for rinsing agent
1 dispenser pump for liquid cleaning agent	Integrated dispenser pump Integrated dispenser pumps facilitate the quick and precise dosing of liquid media.
Volume flow control
Steam condenser
Spray pressure monitoring	Spray arm pressure monitoring The wash pressure is monitored for perfect cleaning results.
Spray arm monitoring	Spray arm monitoring Reliable cleaning performance thanks to the monitoring of the rotation speed of the spray arm.
Interface for process documentation (optional)	Process documentation Safety through the clear documentation of all the reprocessing steps.
Multi-component filter system
Variable-speed heater pump	The heart of perfect results In the individual programmes the speed of the pump and thus the wash pressure is adjusted in line with the relevant requirements – high pressure facilitates the removal of stubborn soiling, whilst low pressure guarantees the complete wetting of all the wash items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times.
Load carrier – direct coupling
DryPlus	DryPlus Efficient hot air drying: Ideal for drying hollow body instruments or narrow-lumened laboratory glassware.
In-door salt container	Patented in-door salt container Ergonomic convenience: The in-door salt container is particularly easy to fill.
Customer Service optical interface
Wash cabinet seamlessly welded using laser technology	Crevice-free wash cabinet Perfect hygiene through optimised geometry and laser welding.
Heater elements outside wash cabinet	Heater elements outside the wash cabinet A plus for hygiene: The heating elements are installed outside the wash cabinet.
Wash cabinet made from high-quality stainless steel (1.4301/304)	Wash cabinet made from high-quality stainless steel. The wash cabinet is made of stainless steel quality 1.4301. The base of the wash cabinet and the inside door panel are qualitatively superior.
Extensive components (option)	Large selection of components Flexible and comprehensive components for optimum cleaning performance and a variety of reprocessing options.

Connection options

RS 232 serial interface (optional)	RS 232 serial interface The serial interface facilitates the exchange of data with other appliances, e.g. for process documentation.
WiFi via DataDiary (optional)	WLAN interface The WiFi interface is ideal for wireless local and network-enabled communication (e.g. for the transfer of data for documentation purposes).
Ethernet interface (optional)	Ethernet interface The Ethernet interface enables cable-supported communication in the local network.
External dispensing modules

Standards, test certificates and symbols

VDE (electrical safety)
IP safety class according to EN 60529: IP 21
EN 61010-1
EN 61010-2-040
RoHS guideline 2011/65/EU
WRAS
EU medical device class IIb

Additional components and consumables

Find additional components and consumables to go with this product

Insert is filled with dental instruments.

Additional components for dental technology

Find here the components that can be bought additionally for this product.

Go to components

Service & Support

Contact

Get in touch with us. We are always there for you and will be happy to answer your questions and requests.

Call our experts.

If you have any questions or need further information please contact us on 0330 160 6693*

*Free of charge.

Get in touch with us.

Request individual consultation appointment

Request your personal consultation appointment for an individual planning.

Request consultation

Request spare parts

Do you need spare parts for your products? Please feel free to contact us!

Request spare parts

Service & Support

Individual requests for service and maintenance contracts

Service and maintenance contracts

Inspection, maintenance and service contribute to preserving the value of your equipment and thus to safeguarding your investment. We offer the right solution for every need and are happy to answer further questions about service and maintenance contracts.

Get in touch

Downloads