The circuit breaker has tripped.
Reset the circuit breaker (see data plate for minimum protection rating).
Support for yourHob
Induction hob not responding
The induction hob no longer responds to the controls.
The system lock or safety lock is activated.
Deactivate the system/safety lock as described in the operating instructions.
The control field is soiled, e.g. covered in fat drippings.
Clean the control field.
There is a technical fault.
Disconnect the appliance from the mains power supply for approx. 1 minute.
Switch off the relevant circuit breaker. Or remove the fine-wire fuse completely. Or switch off the residual current device.
Switch the circuit breaker back on.
Additional media
Operating Instructions finder
Here you will find the operating instructions for your Miele appliances
Find your manual
