SearchFind a store
Support for your

Robot Vacuum Cleaner

Robot Vacuum Cleaner

Fault F7

Fault F7 appears on the robot vacuum cleaner display.

An internal system fault has occurred.

Depending on the model, switch the robot vacuum cleaner off with the I/0 switch or the ON/OFF switch. The switch is located on the side of the robot vacuum cleaner.

Depending on the model, switch the robot vacuum cleaner on again with the I/0 switch or the ON/OFF switch.

The robot vacuum cleaner is operating outside of its permitted ambient temperature range.

Use the robot vacuum cleaner at an ambient temperature between 10 °C and 35 °C.

A battery fault has occurred. The robot vacuum cleaner’s battery is empty.

Check the battery display.

  • The battery display flashes red: depending on the model, switch the robot vacuum cleaner off and on again with the I/0 switch or the ON/OFF switch.

    If F7 goes out after this but the battery display still flashes red, recharge the vacuum cleaner’s rechargeable battery in the docking station.

  • The battery display is not flashing red: press the  sensor control in the control field of the robot vacuum cleaner for more than 3 seconds.

Recharge the vacuum cleaner’s rechargeable battery in the docking station.

RX2 and RX3 – after troubleshooting, the fault message can be reset in the following ways:

  • Switch the robot vacuum cleaner off and on again (I/0 switch).

  • Press the Power button on the remote control.

  • Press the  sensor control in the control field of the robot vacuum cleaner for at least 3 seconds.

If the fault persists, contact the Miele Customer Service Department.

Operating Instructions finder

Operating Instructions finder

Here you will find the operating instructions for your Miele appliances
Find your manual
Book a technician

Book a technician

We are happy to take your repair booking online or by telephone
Plan a visit
Contact us

Contact us

Visit our Contact us page to see the different ways you can speak to us.
Contact us