Demo mode is activated.
Deactivate demo mode. Proceed as follows:
In the case of tumble dryers with an On/Off button:
Switch the tumble dryer off.
Close the door.
Touch and hold the Start/Stop sensor control.
Switch on the tumble dryer while keeping the Start/Stop sensor control pressed.
The Start/Stop sensor control flashes.
The Start/Stop sensor control lights up continuously after 5 seconds.
Release the Start/Stop sensor control briefly.
Touch and hold the Start/Stop sensor control again for 3 seconds.
The Start/Stop sensor control is no longer lit.
Demo mode is deactivated.
In the case of tumble dryers without an On/Off button:
Switch the tumble dryer on.
Open the door.
Touch and hold the Start/Stop sensor control.
Close the door while keeping the Start/Stop sensor control pressed.
The Start/Stop sensor control lights up continuously after 5 seconds.
Release the Start/Stop sensor control briefly.
Touch and hold the Start/Stop sensor control again for 3 seconds.
The Start/Stop sensor control is no longer lit.
Demo mode is deactivated.
