The required final vacuum could not be achieved.
Switch the drawer off and back on again.
Start the vacuum sealing process again with lower vacuum settings if necessary.
Support for yourVacuum Drawer
Vacuum sealing stops after 2 minutes
The vacuum sealing process stops after 2 minutes. A signal sounds and the indicator light lights up red.
After intensive use of the drawer, the oil in the vacuum pump has become extremely hot.
Allow the drawer to cool for 1 hour before starting another vacuum sealing process.
When carrying out a number of consecutive vacuum sealing processes, wait for at least 2 minutes between each process. This prevents the oil from overheating again.
Operating Instructions finder
Here you will find the operating instructions for your Miele appliances
Find your manual
