The sealing bar and/or counterpressure bar are dirty or covered with liquid residues.
Clean and dry the sealing bar and/or counterpressure bar.
Support for yourVacuum Drawer
Weld seam not continuous (in places)
The weld seam is defective or not properly sealed in one or more places.
The rubber on the counterpressure bar is not evenly fitted.
Flatten the rubber.
The edge of the bag is dirty (inside and out).
For a perfect weld seam the edge of the bag must be dry and grease-free in the area of the seam.
Fold the edges of the vacuum sealing bag outwards for filling.
This will give you a clean, perfect weld seam.
The edge of the bag was not positioned smoothly and without creases on the sealing bar.
Position the bag smoothly and without creases along the sealing bar.
The sealing bar has overheated.
Wait a minimum of 2 minutes between individual vacuum sealing processes.
This avoids the sealing bar overheating again.
Operating Instructions finder
Here you will find the operating instructions for your Miele appliances
Find your manual
