The stopcock is not open.
Terminate the wash programme.
Open the stopcock.
Select the programme and start it again.
Support for yourWasher Dryer
Check inlet indicator light flashes
The Check inlet indicator light on the washing machine/washer-dryer flashes. The water inlet is blocked or restricted.
The inlet filter is soiled.
Clean the inlet filter (2).
Consult the operating instructions for further information.
The water inlet hose is kinked.
Remove any kinks or loops from the water inlet hose.
Keep an eye on these points for a while afterwards, as the plastic may weaken and the material may tear. In the event of any damage, the water inlet hose must be replaced. Please contact the Miele Customer Service Department.
The water connection pressure in the water supply pipe is too low.
Please contact the facility manager or a plumber.
There is a technical fault.
Please contact the Miele Customer Service Department.
Additional media
Operating Instructions finder
Here you will find the operating instructions for your Miele appliances
Find your manual
