The position of the programme selector has been changed while the appliance was running.
Turn the programme selector back to the previously started programme.
The programme time is shown in the display.
If you want to cancel the programme, proceed as follows:
If you have the Start/Add laundry sensor control, turn the programme selector to the position and then to any other position.
If you do not have the Start/Add laundry sensor control, touch and hold the Start/Stop sensor control until the time display switches to :.
Rotating bars ... ... , the -0- symbol or the symbol are shown on the display.
The water is pumped away and the door lock is then released.
Open the door.
Close the door.
Turn the programme selector to the required programme.
Start the programme.
Additional information can be found in the linked video.
